Laying metal tiles

Metal roofing tiles are among the most popular materials in modern construction. Roofing works using them are carried out in all regions of Ukraine, providing a productive result. Manufacturers supply a variety of roofing materials, differing in design and color.

The main advantages of metal roofing tiles include cost-effectiveness, light weight, easy installation, and the ability to withstand any weather conditions. The service life of the material is calculated in the range of 20-45 years.

Why choose metal tiles for installation – features of the material

Metal roofing tiles come in the form of a profile sheet made of copper, aluminum or steel. Its surface is treated with polymers for protection. Laying sheets requires a certain technology, while it is worth noting the distinctive features of the material structure:

• Metal base. Responsible for the strength, wear resistance, and rigidity of the sheet. Installation of the roofing depends on the basic properties of the base. Particular attention is paid to the properties of thermal conductivity, noise, and anti-corrosion.
• Polymer layer. Provides brightness and color stability, resistance to external factors. For laying the roof, sheets with polyester, polyurethane, acrylate, and plastisol coatings are used. The layer size in height ranges from 20-30 microns to 200 microns.
• Profiling. This point is important from the point of view of practical and aesthetic value. The presence of relief allows you to avoid bending the sheet, breaks, and also requires compliance with the rules for installing the material.

Preparation for installation of metal tiles

Laying a roof with your own hands is a complex process that requires skills and experience. If installed correctly, such a roof does not require any special maintenance rules or capital investments. For many users, the turnkey roofing service format is the most acceptable in the absence of construction skills.

Installation of roofing sheets involves preparatory work, on which the effectiveness of the result directly depends. You should also stock up on tools:

• tape measure for measuring work;
• construction stapler;
• screwdriver with a set of fasteners;
• marker of a contrasting color;
• circular saw or metal shears;
• rail.

Step-by-step installation involves checking and preparing the base at the initial stage. The essence of the work is the installation of the lathing. Fastening is carried out on the bars. Usually, slats of 30x100 mm or 50x50 mm in size are used. The distance for their installation is determined by the length of the sheet wave module.

Also at this stage, materials for hydro, heat and vapor insulation works are prepared.

Features of laying metal tiles

The technology for installing profiled tiles includes the following algorithm:

1. Laying a layer for hydro- and vapor barrier with subsequent sealing of the seams. In the first case, films are used that are placed in the roofing device between the rafters and the counter-battens. The vapor barrier material is installed in the lower layer of the roofing "pie". In this case, both types of protection should not come into contact with each other.

2. Fastening the metal tiles. Self-tapping screws or nails are used as fasteners. Installation is carried out with a protrusion beyond the lathing of no more than 5 cm.

Particular attention is paid to the installation of strips in the form of a ridge, cornice, end elements. The ridge is installed after laying all the metal tiles. Slots are made for the cornice, and siding or corrugated sheets are used for the lining. The end strips are laid on sheets with an overlap in one wave.

Installation of metal tiles in Kyiv can be ordered from construction companies specializing in this area. This way, you can avoid mistakes during installation and count on a long service life of the roof.

Professional roof installation is a guarantee of quality and reliable operation. The specialists of "RСС ALBA" will not only perform turnkey installation, but also advise the optimal material for a particular case, correctly calculate the roof slope for metal tiles and the number of sheets to purchase.